Home Store RS5 GRP Bodies Brands FG Kyosho
Contact Flashback Moments! T&C's

Rear suspension geometry

New 2016 version rear shock tower and upper wishbone mount with oval plastic insert allows you to change the position of the rear upper wishbone up and down by twisting or changing them. We have two types of inserts and you can change the height of the rear upper wishbone by 1,5mm increments. You can adjust the rest of the suspension with the thickness of the spacers, they are under and above wishbone ball joints. You can change the spacers inside and outside of the rear lower wishbone and outside of the rear upper wishbones to adjust the rear roll center. We have roll center spacers from 2mm to 10mm height.

Suspension Bushings

We create two diferent types of oval bushings for our all-new rear upper wishbone brackets. You can adjust the rear upper wishbone position up and down.
Two types are: Bushing “A”, ordering code 57189. It is standard part of the T16 and Tx16 cars and standard part of the 19114 Adjustable Rear Upper Wishbone Brackets Upgrade kit.
Bushing “B”, ordering code 57188. It is optional part of the T16 and Tx16 cars and standard part of the 19114 Adjustable Rear Upper Wishbone Brackets Upgrade kit.

Wishbone position Zero

By using the 57189 Bushing (“A” Bushing) in the normal position (the “A” letter is in readable direction) you have the same rear upper wishbone position than on the T15 car.

Wishbone position -1,5mm

By using the 57188 Bushing (“B” Bushing) at normal position (the “B” letter is in readable direction) you have 1,5mm lower rear upper wishbone position compared to the basic Zero Position. This means that rear Roll-Center is higher and your car has more rear dynamic camber change.

Wishbone position -3mm

By using the 57188 Bushing (“B” Bushing) at opposite position (the “B” letter is in upside down) you have 3mm lower rear upper wishbone position compared to the basic Zero Position. This means that rear Roll-Center is even higher and you have even more rear dynamic camber change.

Next Page

Wishbone position -4,5mm

By using the 57189 Bushing (“A” Bushing) at opposite position (the “A” letter is in upside down) you have 4,5mm lower rear upper wishbone position compared to the basic Zero Position. This means that rear Roll-Center is very high and you have now quite dynamic camber change.

19114 Upgrade kit

The 19114 Adjustable Rear Upper Wishbone Brackets upgrade kit is compatible with any T14 and T15 cars.
Content of the 19114 kit:
57180 – Rear upper wishbone bracket (1pz)
57185 – Rear Shock tower (1pz)
57188 – Suspension Bushings “A” (4pz)
57189 – Suspension Bushings “B” (4pz)